STANDARD OPERATING PROCEDURE (SOP):PREPARATION OF RED CELL SUSPENSION
September 10, 2025 | by ericwanniang.ehw@gmail.com
BLOOD CENTRE NAME
| SOP Number | Effective date | Pages | Author | Authorised by |
| Version | Review Period | No. of copies | Reviewed by | Date |
| LOCATION Immunohaematology Lab | SUBJECT Preparation of red cell suspension |
| FUNCTION To prepare RBC suspension of appropriate concentration for a given test | DISTRIBUTION -Medical Officer in Charge of Immunohaematology Laboratory for use by all technicians -Master file |
1.SCOPE AND APPLICATION
This procedure applies to all testing that requires red cell suspension preparation.
2. RESPONSIBILITY
It is the responsibility of every technician performing a given test to prepare the appropriate red cell suspension. Every morning, the shift duty technician must prepare A, B & O red cell suspension for the day’s use.
3. REFERENCES
- Technical Manual of American Association of Blood Bank, 18THEdition, 2014, Pages 149, 311, Method 1-7.
- Model Standard Operating Procedures for Blood Transfusion Service, WHO, New Delhi 2002.
4. MATERIALS REQUIRED
EQUIPMENT: Calibrated centrifuge
REAGENTS: 0.9% normal saline.
SPECIMENS:
- Clotted or anticoagulated blood specimen of donor.
- Clotted or anticoagulated blood specimen of patient.
- Donor unit segment.
GLASSWARE:
- Pasteur pipettes.
- Serum tubes.
MISCELLANEOUS:
- Discard box.
- Plastic beakers.
- Rack to hold tubes.
5. PROCEDURE
PRINCIPLE:
The ratio of serum to red cells may dramatically affect the sensitivity of agglutination tests. Consistent preparation of either 2 to 5% red cell suspension is critical to any agglutination test.
POOLED CELL SUSPENSION:
- Label tubes with pooled A, B, and O groups and 5% A, B and O group
- Place one drop of red cells each from 3 blood bag’s segment containing A group into the A labelled tube.
- Place one drop of red cells each from 3 blood bag’s segment containing B group into the B labelled tube
- Place one drop of red cells each from 3 blood bag’s segment containing O group into the O labelled tube
- Fill the tube up to ¾ full tube with 0.9% saline to resuspend the cells.
- Centrifuge the tubes for 3 minutes on 3000rpm speed. Decant the supernatant fluid.
- Repeat steps 5 and 6 for 3 times to give properly washed cells.
- Remove any debris or fibrin with the pipette.
- Test the pooled cells prepared using the antisera (anti-A, B, AB and D) in use.
- For making 5% red cell suspension, add 1 drop of washed red cell to 19 drops of saline marked 5% tube of each blood groups
- Mix the tubes gently.
- The cells should be kept at 4 ± 20C in the refrigerator when not in use.
6. LIMITATIONS:
Hemolysis of the red blood cells from improper washing may result in false results. A cell suspension that is too heavy or too light may produce false positive or false negative results.
7. DOCUMENTATION
- Enter the donor unit numbers from which pooled cells are prepared in the donor register.
- Record the results of testing with the antisera in use.
- Enter the manufacturer’s name and batch number of the antisera.
8. END OF DOCUMENT
RELATED POSTS
View all